Integrated Diagnosis of Calcite Scaling in Well X at an Indonesian Geothermal Field

Authors

  • Akhmad Sofyan Politeknik Energi dan Mineral Akamigas, Indonesia
  • Trisya Amanda Nur Rahma Politeknik Energi dan Mineral Akamigas, Indonesia
  • Kristofol Waas Politeknik Negeri Ambon, Indonesia

DOI:

https://doi.org/10.59261/bustechno.v7i6.858

Keywords:

Calcite Scaling, Geothermal Well, PHREEQC, Thermodynamically Sensitive Interval, Wellbore Restriction

Abstract

Background: Mineral precipitation reduces geothermal well productivity by narrowing the effective flow area and increasing hydraulic resistance.

Objective: This study investigates production impairment in Well X at an anonymized geothermal field in West Java, Indonesia.

Methods: A retrospective, single-well diagnosis was conducted by integrating exponential decline-curve fitting, pressure–temperature–spinner logging, WellSim simulation, PHREEQC output, hydraulic scenario analysis, X-ray diffraction (XRD), and downhole video inspection.

Results: Decline-curve fitting yielded a decline coefficient (D) of 0.0035 day⁻¹, an initial production rate (qᵢ) of 25.33 t/h, and an R² of 0.3825, indicating a limited model fit without ruling out reservoir depletion. Temperature profiles converged near 1,000 m measured depth (MD). Because mist flow and high steam mass fractions were observed throughout the modeled interval, the 950–1,050 m interval was interpreted as thermodynamically sensitive and prone to scaling, rather than as the initial flashing point. The supplied PHREEQC output indicated calcite supersaturation; however, incomplete model reconstruction and unmatched pressure–temperature conditions limit its applicability to downhole interpretation. A hydraulic scenario involving simultaneous changes in pipe diameter and wall roughness increased the combined frictional and accelerational pressure gradient from 211.67 to 317.32 Pa/m. XRD confirmed the presence of calcite, while downhole video revealed mineral deposition near 975 m; sample recovery was reported separately at approximately 984 m.

Conclusion: The integrated diagnosis supports calcite scaling as a major contributor to production impairment. However, its contribution cannot be isolated from the effects of reservoir depletion or operational changes.

References

Allan, G., Pogacnik, J., Siega, F., & Addison, S. (2019). Wellbore simulation to model calcite deposition on the Ngatamariki geothermal field, NZ. Proceedings of the 44th Workshop on Geothermal Reservoir Engineering. https://pangea.stanford.edu/ERE/db/GeoConf/papers/SGW/2019/Allan.pdf

Boch, R., Leis, A., Haslinger, E., Goldbrunner, J. E., Mittermayr, F., Fröschl, H., Hippler, D., & Dietzel, M. (2017). Scale-fragment formation impairing geothermal energy production: Interacting H₂S corrosion and CaCO₃ crystal growth. Geothermal Energy, 5, 4. https://doi.org/10.1186/s40517-017-0062-3

Bu, X., Jiang, K., Wang, X., Liu, X., Tan, X., Kong, Y., & Wang, L. (2022). Analysis of calcium carbonate scaling and antiscaling field experiment. Geothermics, 104, 102433. https://doi.org/10.1016/j.geothermics.2022.102433

Cao, B., Ma, Y., Liu, M., Li, S., Tian, H., & Feng, G. (2024). Predictions of locations of flash point and calcite scaling of geothermal fluids in wellbore by chemical and thermodynamic simulations. Geothermics, 121, 103057. https://doi.org/10.1016/j.geothermics.2024.103057

Hassani, K., & Zheng, W. (2025). A review of recent advances in mineral scaling in geothermal energy systems: mechanisms, mitigation, and case studies. Environmental Earth Sciences, 84(14), 418.

Hörbrand, T., Baumann, T., & Moog, H. C. (2018). Validation of hydrogeochemical databases for problems in deep geothermal energy. Geothermal Energy, 6, 20. https://doi.org/10.1186/s40517-018-0106-3

Jamero, J., Zarrouk, S. J., & Mroczek, E. (2018). Mineral scaling in two-phase geothermal pipelines: Two case studies. Geothermics, 72, 1–14. https://doi.org/10.1016/j.geothermics.2017.10.015

Khasani, Deendarlianto, & Itoi, R. (2021). Numerical study of the effects of CO₂ gas in geothermal water on the fluid-flow characteristics in production wells. Engineering Applications of Computational Fluid Mechanics, 15(1), 111–129. https://doi.org/10.1080/19942060.2020.1862709

Köhl, B., Elsner, M., & Baumann, T. (2020). Hydrochemical and operational parameters driving carbonate scale kinetics at geothermal facilities in the Bavarian Molasse Basin. Geothermal Energy, 8, 26. https://doi.org/10.1186/s40517-020-00180-x

Lei, H., Xie, Y., Li, J., & Hou, X. (2023). Modeling of two-phase flow of high temperature geothermal production wells in the Yangbajing geothermal field, Tibet. Frontiers in Earth Science, 11, 1019328. https://doi.org/10.3389/feart.2023.1019328

Lu, P., Zhang, G., Apps, J., & Zhu, C. (2022). Comparison of thermodynamic data files for PHREEQC. Earth-Science Reviews, 225, 103888. https://doi.org/10.1016/j.earscirev.2021.103888

Quinao, J. J., Buscarlet, E., & Siega, F. (2017). Early identification and management of calcite deposition in the Ngatamariki geothermal field, New Zealand. Proceedings of the 42nd Workshop on Geothermal Reservoir Engineering. https://pangea.stanford.edu/ERE/db/IGAstandard/record_detail.php?id=27971

Shoeibi Omrani, P., Poort, J., Barros, E. G. D., de Zwart, H., Machado, C. G., Wasch, L., Twerda, A., Rijnaarts, H. H. M., & Shariat Torbaghan, S. (2025). A probabilistic model-based approach to assess and minimize scaling in geothermal plants. Geothermal Energy, 13, 9. https://doi.org/10.1186/s40517-025-00336-7

Sofyan, A., Bujang, Y. D. G., & Suranta, B. Y. (2023). Heat loss effect analysis by using JIWAFlow wellbore simulation in geothermal field Well-Y. AIP Conference Proceedings, 2730(1), 20116. https://doi.org/10.1063/5.0120544

Sofyan, A., Jaya, R., Susanto, H., Njeru, R. M., Bozsó, G., & Szanyi, J. (2025). Scale treatment planning using broaching method in a vapor-dominated geothermal Well X at Kamojang geothermal field. Eng, 6(4), 67. https://doi.org/10.3390/eng6040067

Sujarmaitanto, H., Wardana, A. P., Iskandar, C., Sesesega, R. S., & Nurpratama, M. I. (2024). Insights on the water produced from a vapor-dominated system at Patuha geothermal field, Indonesia. Proceedings of the 49th Workshop on Geothermal Reservoir Engineering. https://pangea.stanford.edu/ERE/db/GeoConf/papers/SGW/2024/Sujarmaitanto.pdf

U.S. Geological Survey. (2025). PHREEQC version 3 [Computer software]. https://www.usgs.gov/software/phreeqc-version-3

Wahba, A., Khattab, H., Tantawy, M., & Gawish, A. (2022). Modern decline curve analysis of unconventional reservoirs: A comparative study using actual data. Journal of Petroleum and Mining Engineering, 24(1). https://doi.org/10.21608/jpme.2022.128147.1123

Wanner, C., Eichinger, F., Jahrfeld, T., & Diamond, L. W. (2017). Causes of abundant calcite scaling in geothermal wells in the Bavarian Molasse Basin, Southern Germany. Geothermics, 70, 324–338. https://doi.org/10.1016/j.geothermics.2017.05.001

Zhao, H., Huang, Y., Deng, S., Wang, L., Peng, H., Shen, X., Ling, D., Liu, L., & Liu, Y. (2023). Research progress on scaling mechanism and anti-scaling technology of geothermal well system. Journal of Dispersion Science and Technology, 44(9), 1657–1670. https://doi.org/10.1080/01932691.2022.2033625

Downloads

Published

2026-11-19